View BCM3034_193969.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BCM3034
PRODUCT
Brief
OF BENEFITS
UNIVERSAL ADVANCED DOWNSTREAM MODULATOR
BCM3034 FEATURES SUMMARY
* Integrated QAMLink Advanced downstream modulator
* Supports 4, 16, 32, 64, 128, 256, 512 and 1024 QAM * Variable symbol rates up to 10 Mbaud * Programmable 80-tap dual square-root Nyquist filters * Programmable complex 24-tap T/2 pre-distortion filter * Digital interpolation filters * Quadrature direct digital frequency synthesizer and upconverter * X/sinX filter for DAC distortion compensation
Presents a * modulatorshigh-performance, integrated solution for in digital cable-TV head-end, Cable
*
Modem Termination Systems (CMTS), digital microwave radio, SMATV and MMDS applications. An integrated solution that reduces board space and costs with:
* On-chip 64K static RAM to eliminate external RAM * Integrated 10-bit DAC with power control * Additional burst modulator for out-of-band signaling * Small footprint to enable high-density equipment
Fully integrated ITU-T J.83 * (DVB/DAVIC/EuroDOCSIS Annex A Annex B /IEEE802.14), (DigiCipher II(R)/SCTE/DOCSIS/IEEE 802.14 and Annex C (Japan) FEC encoder
* All codes extended to support 512/1024-QAM * On chip 64K static RAM for interleaving
Improves bandwidth * QAM modulation. efficiency through 512/1024* Enables advanced digital services over narrow RF channels.
Supports * modulatorNorth American, European and Asian standards enabling a single design for
* Integrated 10-bit digital-to-analog converter Integrated additional burst modulator for power * management of CPE equipment Optional * DAC 12- or 14-bit digital IF output for external * I C or SPI-compatible microcontroller interface * JTAG test interface * 128-pin PQFP package Operates over * degrees C) industrial temperature range (-40 to +85
2
5-65 MHzUpstream
* * *
worldwide application. Programmable analog IF outputs up to 100 MHz simplifies image rejection filters. Programmable high-granularity digital output options remove the need for SAW filters in final RF stage while providing designers multiple options in DAC selection. Advanced functions deploys in harsh environments.
* Distributed CMTS in Hybrid Fiber Coaxial Fiber Node
Cable Modem Termination System (CMTS) Block Diagram
BCM3138 Dual Adv. PHY Receiver BCM3138 BCM3138
Ethernet
Routing/ Classification Engine
WAN
BCM3212
CMTS MAC
System CPU PCI Bus Downstream SDRAM (PHS, output queues)
44 MHz IF
BCM3034
PA LPF
Memory
Advanced QAM Modulator
BCM3034
OVERVIEW
BCM3034 Block Diagram
8 PS_IN[7:0] Extended ITU-T J.83 PS_VALID PS_SYNC Annex A/B/C Encoder
Programmable Nyquist = .12-.18 Predistortion Programmable Nyquist = .12-.18 Filter 24-tap
Interpolation Filter X QDDFS sin X SCALE D/A
A_IF +/-
Interpolation Filter
D_IF[13:0]
DAC_CLK OB_DIN Programmable RS FEC Encoder 4/16/32 QAM Burst Pwr. Mgmt. Modulator D/A OB_IF +/-
PS_CLK
Output Clock PLL Source Clock Generator
PLL / Clock Generation
The BCM3034 QAMLink Universal Modulator is a highly integrated solution that significantly decreases the board space and cost of modulators in digital cable-TV head-ends, digital cable modem head-ends, digital microwave radio, SMATV and MMDS applications. The BCM3034 features an advanced downstream QAM modulator that includes an extended ITU-T J.83 Annex A/B/C FEC encoder, an all-digital QAM modulator supporting up to 1024-QAM, and an integrated 10-bit D/A converter with power control. Additionally, the BCM3034 includes a second modulator that can be used for out-of-band signaling or CPE power control. The advanced downstream QAM modulator supports symbol rates up to 10 MBaud and symbol constellations from QPSK up to 1024-QAM, enabling up to 100 Mbps operation. The modulator accepts either a serial or parallel data stream, optionally recovers the data timing and encodes the data with one of the supported coding standards. The resulting stream of QAM symbols then enters the modulator where the data pulses are shaped by the dual programmable linear phase square-root Nyquist filters. Built-in coefficients are provided for these filters for industry-standard excess bandwidth factors (alpha = 12%, 15% or 18%). The filtered data is then passed through a 24-tap complex T/2-spaced predistortion filter. This filter allows the user to compensate for non-idealities, such as slope distortion,
Broadcom(R), the pulse logo(R) and Connecting EverythingTM are trademarks of Broadcom Corporation and/or its subsidiaries in the United States and certain other countries. All other trademarks are the property of their respective owners.
introduced elsewhere in the RF portion of a design. Interpolation filters then upsample the signal to the output sample rate while providing additional signal filtering. A quadrature direct digital frequency synthesizer and I/Q modulator allows the QAM spectrum to be mixed to a precise output center frequency. The spectrum can then be predistorted by the integrated X/sinX filter to compensate for DAC distortion. The final signal can be output to the integrated 10-bit, 200-MS/s D/A converter, which includes differential analog outputs and a gain stage that can set the output power in 0.4 dB steps. Alternatively, a selectable 12or 14-bit digital IF output can drive an external D/A converter with sufficient linearity to enable final RF sections that do not require the use of SAW filters to meet industry-standard RF output templates. The BCM3034 is a flexible, cost-effective worldwide solution. Because the chip accepts variable data rates and supports multiple digital transmission standards, manufacturers only need to develop one modulator for worldwide usage. The integrated feature set in the BCM3034 significantly reduces the board space in modulators, giving manufactures a chip solution that is both cost-effective and easy to use.
BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013
(c) 2002 by BROADCOM CORPORATION. All rights reserved. 3034-PB02-R-4.19.02
Phone: 949-450-8700 FAX: 949-450-8710 Email: info@broadcom.com Web: www.broadcom.com

▲Up To Search▲

Price & Availability of BCM3034

	To Download BCM3034 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .